补偿贸易合同模板（通用30篇）

　　第五条　利息计算

　　甲方所开的远期信用证及乙方所预付货款的利息应由甲方负担。双方议定年利息为百分之_________。

　　第六条　技术服务

　　货物到达甲方口岸后，由甲方自行安装，但在主要设备安装过程中，甲方认为需要时，乙方必须派出技术人员进行现场指导，提供必要的技术服务，在此过程中由于技术上的问题，所造成的损失由乙方负责。

　　经双方协调，为完成此项工作，由乙方派出_________数量的技术人员。在中国的一切费用均由乙方承担。

　　第七条　附加设备

　　在执行在协议过程中，如发现本合同项下的机械设备在配套生产时需要继续增添新的机械设备或测试仪器时，可由双方另行协调，予以增订。增订的项目仍应列入本合同范围之内。

　　第八条　保险

　　设备进口以后由乙方投保。设备所有权在付清货款后发生转移，之后，如发生意外，损失先由保险公司向投保人赔付，再按比例退回甲方已支付的设备货款。

　　第九条　违约责任

　　乙方不按合同规定购买补偿商品或甲方不按合同规定提供商品时，均应按合同条款承担违约责任，赔偿由此造成的经济损失，并向对方支付该项货款总值的_________%的罚款。

　　第十条　履约保证

　　为保证合同条款的有效履行，双方分别向对方提供由各自一方银行出具的保函，予以担保。甲方的担保银行为中国银行_________分行，乙方的担保银行为_________国_________银行。

　　第十一条　合同条款的变更

　　本合同内容如遇特殊情况需要变更，须经双方协商一致。

　　第十二条　不可抗力

　　由于人力不可抗拒的原因，致使一方或双方不能履行合同有关条款，应及时向对方通报情况，在取得合法机关的有效证明之后，允许延期履行或不履行有关合同义务，并可根据情况部分或全部免除违约责任。

　　第十三条　仲裁

　　凡是有关本协议或执行本协议而发生的一切争议，应通过友好协商解决。如不能解决，则应提交_________国_________仲裁委员会按_________仲裁程序在_________进行仲裁。仲裁适用法律为_________国法律。该仲裁委员会作出的裁决是最终的，甲乙双方均受其约束，任何一方不得向法院或其它机关申请变更。仲裁费用由败诉一方负担。

　　第十四条　文字、生效

　　本合同用中、_________两种文字写成，两种文字具有同等效力。

　　本合同自签字之日起生效，有效期为_________年。期满后，双方如愿意继续合作，经向中国政府有关部门申请，获得批准后，可延期_________年或重新签订合同。

　　甲方(签字)：_________　　　　　　　　乙方(签字)：_________

　　_________年____月____日　　　　　　　　_________年____月____日

　　签订地点：_________　　　　　　　　　　签订地点：_________

　　附件

　　party a: _________company， china.

　　address:_________

　　tel: _________

　　telex: _________

　　party b: _________ company

　　address: _________

　　tel: _________

　　telex: _________

　　article 1　introduction

　　(1)party b shall provide party a with _________machines of model _________to be used in production.along with them shall also be provided various kinds of supporting machinery，accessories and spare parts it needs，and the various kinds of measuring and testing instruments required in the course of production，the specific models， names，specifications， quantity，unit prices，packing requirements and the deadline for delivery shall be specified in an additional contract to be made between the both parties，which will serve as a integral part of the contract.

　　(2)the total cost of the entire machinery and its supporting equipment shall be paid to party b of the part of the products and/or other commodities produced by party a with the machinery supplied by party b.it may also be paid to party b of (a certain product)turned ort by .(this practice is hereinafter referred to as a make-up payment).the specific names，quantity and unit price of the products to be delivered as make-up payment，and the deadline for delinery，are to be specified in an additional contract between the two parties on products-supplying as make - up payment，which shall be the integral part of the contract.the two additional contracts mentioned above may be merged as one called buy - and sell contract on compensation trade.

　　article 2　terma of payment

　　the two parties shall open a l/c in favour of each other.i.e.party a shall open，at regular intervals，long-term l/c in favour of party b to pay in install ments the entire cost of the machinery and its support sight l/c in favour of {arty a as a payment for the cost of the products to be delivered by party a.party a shall pay for the total cost of the machinery and its supporting equipment with the sum of money which party b shall pay the products to be delivered by party a as a make - up payment.in case the money to be paid by pairy b is not enough to cover the value of the long - term l/c is determined by the at - siggt l/c opened by party b and its down payment as stipulated in the contract .party b grarantees to fulfil what is required of it to do as mentioned herein.

　　article 3　deadline for payment

　　party a shall pay the total cost of the machinery and its supporting equipment supplied by party b by delivering the products it produces to party b as a make - rp payment on a month - to - month basis ， and pay is off within a preriod of _________ years and _________months.the payment shall start approximately _________ months after the first delivery of the machinery is made .in principle，the sum to be paid per month shall be _________ percent of the total amount due to be paid for the machinery party a can make its payment ahead of schedule with a notice given to party b _________ months in advance.during the compensation period ，party b shall open a l/c in favour of party b，covering the total amount ， at sight ， irrevocable ， divisible and assignable ，in accordance with the relevant provisions in the buy - and - sell contract on compensation trade.

　　article 4　currency for pricing

　　products provided by either party shall be priced in terms of_________.all the items supplied by party b，including machinery ，the required apparatus，accessories and spare parts shall be priced directly in terms of _________ above mentioned ;while the products provided by party a as a make - up payment for the machinery supplied by party b shall be first priced in terms of rmb as orher similar exports at the time the contract is made and then the prices in rmb shall be turned into those in _________ above mentioned according to the current exchange rate at the time.

　　article 5　interest rate

　　party a shall pay the interest on its long - term l/c and the down payment of party b.the annual interest rate is agreed upon at _________%.

　　article 6　technical service

　　after arrival at the destination port，the machinery shall be assembled by party a.when party a believes it is necessary ，party b shall send its technicians to provide on-the-spot instructions and other required technical assistance during the course of assembling. party b shall be liable for the losses incurred in the coures fo assembling as a result of technical default of its prat.

　　after approval by both parties， party b shall send a group of technicians to china to faciliate the completion of the project. the cost incurred in china shall be borne by party b.

　　article 7　additional equipment

　　in the course of implementing the contract if it is foun necessary that ，in addition to the machinery and accessories already listed in the provisions， some additional items of the equipment and measuring and testing apparatus are needed， an additional order shall be agreed upon through negotiation .the items thus added shall be incorporated in the contract.

　　article 8　insurance

　　after being delivered in china， the machinery and its supporting equipment shall be insured by party b. the unforeseen losses in connection with the equipment shall be indemnified for by the insurance company first to the insurer (party b) in case the equepment has already been paid off for and thus transferred into party a's possession.then a proportional part of the sum paid by the insurance company shall be allotted to party a to cover the payment party a has already made for the items of equipment involved the losses.

　　article 9　liability for breach

　　either party shall be liable for a breach of contract in accordance with the provisions in the contract and shall indemnify for all the losses thus if party b should fail to make purchase of the products to be delivered by party a as make - up payment ， or party a should fail to deliver the products for compensation . in such case， the breaching party shall pay to the other a sum as a fine ， which shall account for _________ % of the total cost the products in question.

　　article 10　performance guarantee

　　to guarantee the implementation of the contract， each party shall submit to the other a performance guarantee issued by a bank agreed by both parties. the guarantee bank of party a is bank of china， while that of party b is _________ bank.