产品设备技术引进合同（精选30篇）

　　2.6 to ensure the manufacture of contract products， party b agrees to the introduction of some domestic equipment by party a bo be used with the equipment provided by party b in the manufacture. details of such domestic equipment are set forth in appendix 4 of the contract.

　　2.7 party b shall， according to the conditions and requirements as specified in appendix 4， render technical training to party a' s personnel in the factory of party b so as to ensure that the personnel can master the know - how and be able to manufacture the contract products.

　　2.8 party b shall， according to the conditions as specified in appendix 5， assign competent ex. perts to party a's factory to render technical supervision and technical service.

　　3. contract price_________shall be training fee.

　　3.2 the above contract price is fixed and shall include the expenses to ship all the technical documentation to shenzhen as specified in chapter 2 of the contract. such contract price shall also include the expenses for party b to carry out the other contract obligations of this contract.

　　3.3 all the calculations and payment of expenses of this contract shall be in u/s/dollars.

　　3.4 the total price of the equipment shall be_________. the execution shall be subject to the provisions of the epc.

　　4. payment & payment conditions

　　4.1 the payment of all the expenses under this contract shall be made by m/t through bank of china， shenzhen branch and the bank designated by party b. all the bank expenses occuring inside china shall be borne by party a and those outside china shall be borne by party b.

　　4.2 payment:

　　4.2.1 15% of the above contract price， e. g._________shall be paid by party a to party b by m/t within 30 days after party a has received from party b the following technical documentations and documents and providing that they are in conformity with the contract:

　　(2)one original copy of the letter of confirmation of party b to complete the technical documentations as specified in appendix 2 of the contract within 2 months after the contract takes effect.

　　(3)sight draft one original and one copy.

　　(4)commercial invoice of _________in four copies.

　　4.2.2 _________of the_________contract price amounting to_________shall be paid by party a to party b by m/t after party a has received all the technical documentations and 15 days prior to the technical training.

　　4.2.3 _________of the_________contract price amounting to_________shall be paid by party a to party b by m/t after in installation and testing of the equipment are completed， the equipment is put into operation and produces qualified products and both parties have signed certificate of acceptance， and within 30 days after party a has received the following documents and proved that they are in conformity with the contract:

　　(1)commercial invoice of_________in four copies.

　　(2)certificate of acceptance of contract product quality signed by both parties in two copies.

　　(3)original and copy of sight draft one copy respectively.

　　4.3 payment and terms of payment of the epc amounting to_________shall be subject to the provisions thereof.

　　5. delivery of technical documentations & equipment

　　5.2 the delivery of the equipment and equipment technical documents shall be subject to the terms of delivery of the epc.

　　5.3 within 2 working days after each lot of technical documentations is shipped， party b shall notify party a by telephone the date of shipment， quantity， number of cases， weight， number of airbill of lading， contract number， flight number and expected date of arrival and send by air - mail - register to party a the following documents:

　　(1)air bill of lading one original and four copies.

　　(2)detailed list of technical documentations in three copies.

　　5.4 if the technical documentations are hand carried to shenzhen， the date when party a signs the receipt shall be taken as the date of delivery of the technical documentations.

　　5.5 in case of any loss， shortage of damage of the technical documentations during shipment， party b shall， within the possible shortest time which， however， doesn't exceed 20 days from notification by party a， make replacement to party a free of charge.

　　5.6 the packing of the technical documentations should be strong， suitable for long distance transportation and repeated loading and unloading. precautions against rain and moisture shall also be taken. each case shall be marked in english indicating the following contents:

　　(1)contract number：_________

　　(2)consignee：_________

　　(3)shipping mark：_________

　　(4)destination：_________

　　(5)consignor：_________

　　(6)weight：_________

　　(7)case number：_________

　　5.7 in each case， a detailed packing list in two copies shall be inserted.

　　6. modifications & improvement of technology

　　6.1 in the event there is any part in the technical documentations not suitable for party a's practical production conditions， such as standards of design， standards and requirements on materials， engineering and facilities， party b shall be responsible to assist party a to make modifications which shall then be confirmed by both parties.

　　6.2 during the term of contract， if either party makes any improvement and development with regard to the technology contents and scopes of the contract， such party shall provide the information of the improvement and development to the other party free of charge.

　　6.3 the ownership of the above improvement and development shall be retained to the providing party. the other party shall not be entitled to any application for patent， neither shall the other party transfer such improved and developed technology to any third party.

　　7. assessment & acceptance of products

　　7.1 to ensure that the know- how supplied by party b is correct， reliable and advanced， both parties shall jointly perform in party a's factory the assessment and acceptance of the contract products in accordance with the provisions of appendix 6 of the contract.

　　7.2 according to chapter 2， the technical requirements， standards and drawings shall be taken as evidence of the assessment and acceptance of contract products. the details are set - forth in appendix 1 of the contract.

　　7.3 if the contract products are qualified， both parties shall jointly sign a certificate of acceptance in four copies， two for each party.

　　7.4 if the products cannot meet the requirements of the contract， both parties shall hold friendly discussions to analyse the reasons and take measures to correct any defect and prepare for the second assessment and acceptance of the contract products.

　　7.5 if the failure of the first assessment and acceptance is due to party b's responsibility， party b shall send experts to participate in the second or the third assessment and acceptance， and expenses thus occur shall be borne by party b; if the failure is due to party a's responsibility， the expenses shall be borne by party a.

　　7.6 if after the second assessment and acceptance the products still cannot meet the requirements， if the responsibility lies in party b， party b shall compensate party a for the direct economic losses thus occur， take measures to correct the defects and participate in the third assessment and acceptance; if the responsibility lies in party a， all the losses shall be borne by party a itself.

　　7.7 if the products are still not qualified after the third assessment and acceptance and the responsibility lies in party b， party b shall be responsible for all the losses thus caused and party a shall have the right to terminate the contract and raise a claim against party b according to chapter 8; if the responsibility has in party a， both parties shall mutually discuss the further implementations of the contract.

　　8. guarantee & claim

　　8.1 party b guarantees that technical documentations are those used by party b and such documentations are proved reliable and of latest technology. party b also guarantees that during the term of contract， party b shall notify party a on time of any development and improvement of the technology it achieves.

　　8.2 party b guarantees that the delivered technical documentations are complete， correct， uniform， clear and the delivery is on time. detailed requirements are as follows;

　　complete: the technical documentations delivered by party b shall include all those specified in appendix 2 of the contract without omission.

　　correct: there is no error in the technical documentations delivered by party b. when party a strictly follows such documentations， the products manufactured are qualified.

　　uniform: all the signs， standards and specifications used in the technical documentions are uniform and there is no contradiction.

　　clear: all the drawings， lines， language notes， signs， etc. used in the technical documentations are clear and easy to read.

　　on time: the date of delivery of the technical documentations shall not be later than the delivery schedule as set forth in appendix 2 of the contract.

　　8.3 if there is any part of the technical documentations not in conformity with the requirements of 8.2， party b shall， within 30 days from receipt of notice from party a， make supplements or replacements free of charge.

　　8.4 the delivered equipment shall be installed and tested by party b and shall fully comply with the technical requirements and processing quality of the contract.